Control III Disinfectant Solution 16oz Overview
Control III Hospital-Grade Disinfectant is a germicide trusted by hospitals to disinfect medical equipment. You can get the same medical-grade clean at home, and be sure you've eliminated all bacteria and viruses that could be lurking in your equipment.
This 16 oz bottle is a concentrated formula and is meant to be mixed with water. A little goes a long way, as 1 oz of the solution is meant to be mixed with a gallon of water, yielding a gallon of cleaner that will last 14 days. Put it in a spray bottle, and you have the most powerful cleanser on the market. Put it in a bucket, and you'll be able to soak your equipment, killing all germs inside of ten minutes.
Sometimes you can't disinfect all that well using mild soap and water. While you may get rid of some deposits with a little soap and a lot of scrubbing, you won't be able to get the deep clean you're probably looking for. That's where Control III Hospital-Grade Disinfectant can help!
Kills These Germs and 99% of All Others:
- HIV-1
- Pseudomonas aeuginosa
- Staphylococcus aureus (MRSA)
- Salmonella choleraesuis
- E. Coli
- Herpes Simplex virus type 1
- Herpes Simplex virus type 2
- Influenza virus type A
- Influenza A2 virus
- Vaccinia viruses
- Adenovirus type 5
Features & Benefits
- Gives Your Equipment the Ultimate Clean
- Kills 99.9% of All Bacteria, Germs, and Viruses
- Helps Reduce Your Likelihood of Getting Sick Again
- Safe for Using with CPAP Masks and Accessories
- 16 oz Bottle Makes 16 Gallons of Disinfectant Solution!
Gives Your Equipment the Ultimate Clean
When it comes to disinfecting your CPAP equipment, don't settle! Give your equipment the best clean possible, using the power of Control III. It's the same brand trusted by hospitals to sanitize medical equipment. Why not treat yourself to the cleaner that has one of the most powerful disinfectants available to the public, and keep your CPAP equipment in the best shape possible?
Kills 99.9% of All Bacteria, Germs, and Viruses
By soaking your CPAP mask and accessories in a bucket of water containing the Control III solution, you'll kill 99.9% of all bacteria, germs, and viruses in about 10 minutes. From there you can wipe away any remaining residue and have perfectly sanitized CPAP equipment, ready for your next use.
Helps Reduce the Likelihood of Getting Sick Again
If you're currently fighting a cold or infection, you should be using a daily cleaning routine to kill the germs you're leaving behind nightly. If left untouched, the germs for your cold could mutate into something new, causing you to get sick again. Who wants that? By cleaning your equipment daily with Control III, you'll be reducing the chance that you'll get sick again.
Safe for Using with CPAP Masks and Accessories
When properly diluted with water, the Control III solution can be used to safely disinfect a CPAP mask, hose, and other accessories. It's important to make sure that the solution is properly diluted before use, and never use the concentrate straight out of the bottle to avoid injury.
16 oz Bottle Makes 16 Gallons of Disinfectant Solution
The recommended ratio for mixing the Control III Disinfectant is 1 oz of solution for every gallon of water. It's important that you measure carefully and not add extra cleaner to the gallon of water, as this can create a mixture that may be toxic. The 16 oz bottle will create 16 gallons of cleaner and each gallon can be able to be stored for 14 days.
